The AKG D5 Vocal Dynamic Microphone is a handheld super-cardioid dynamic microphone designed to accurately capture vocals and instruments for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated Varimotion diaphragm exhibits a frequency-independent super-cardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high-gain-before-feedback and reduces stage bleed through the mic. Handling noise is minimized via the dual-shock capsule mount while the integrated pop filter impedes plosives and wind noise.
The 70 Hz to 20 kHz frequency response and maximum SPL of 147 dB at 1% THD ensure reliable reproduction of various sources from loud vocals to punchy snares. The D5 boasts a rugged die-cast housing and a spring-steel, wire-mesh grille. It ships with a stand adapter and storage bag.
AKG D5 Vocal Dynamic Microphone Features:
- Polar pattern - supercardioid
- Frequency range - 70Hz to 20kHz
- Sensitivity - 2.6 mV/Pa (-52 dBV)
- Max. SPL - 147/156dB SPL (for 1% / 3% THD)
- Equivalent noise level - 18dBa
- Impedance - <= 600 ohms
- Recommended load impedance - >= 2000 ohms
- Connector - 3-pin XLR
- Finish - matte grayish-blue
- Dimensions - length: 7.3"; diameter: 2"
- Net weight - 12 oz.
Brand AKG Manufacture SKU D5 UPC 885038018575 Transducer Dynamic Polar Pattern Supercardioid Frequency Response 70Hz to 20kHz Form Factor Handheld Dynamic Range (Typical) Not Specified By Manufacturer Signal-to-Noise Ratio 76 dB Maximum Input Sound Level 147/156 dB SPL (for 1% / 3% THD) Sound Field Mono Power Requirements No Output Impedance < / = 600 ohms Operating Principle Pressure Gradient Output Connectors 3-pin XLR Capsule Dynamic Pad No Polar Pattern Supercardioid Low Frequency Roll-Off No Dimensions 2 x 7.3" (51 x 185.2mm) Weight 340g (12 oz) Circuitry Solid-State Pad None High-Pass Filter None
Frequency Range 70 Hz to 20 kHz Maximum SPL 147 dB SPL Impedance 600 Ohms Load Impedance 2000 Ohms Sensitivity 2.6 mV/Pa Equivalent Noise Level 18 dB A-Weighted
Output Connectors (Analog) 1 x XLR 3-Pin
Mounting Mic Clip/Stand Adapter (Included) Included Case Zipper Pouch Included Filters None Dimensions ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm Weight 11.29 oz / 320 g