Cloud Microphones Cloudlifter CL-Z Mic Activator with Vari-Z and Vari-HPF

More Views

Cloud Microphones Cloudlifter CL-Z Mic Activator with Vari-Z and Vari-HPF
$249.00

Availability: In stock

The Cloud Microphones Cloudlifter CLZ Microphone Activator with VariZ and VariHPF is a compact, single-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbons.
Description

Details

The Cloud Microphones Cloudlifter CLZ Microphone Activator with VariZ and VariHPF is a compact, single-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbons. The Cloud Microphones Cloudlifter CLZ Microphone Activator with VariZ and VariHPFuses any standard phantom-powered mixer or microphone input device to provide up to +25 dB of clean gain, variable input impedance, and a variable high-pass filter. Having an input impedance control that is sweepable from 150 Ohms to 15 kOhms allows you to creatively load the microphone's output transformer, with the result being a wide range of new tonal variations becoming available to each mic.

The Cloud Microphones Cloudlifter CLZ Microphone Activator with VariZ and VariHPF improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. It is housed in a rugged steel enclosure which offers shielding and durability.

The variable high-pass filtering works in conjunction with the impedance value, allowing for even more tonal shaping and control. When engaged, the frequency cutoff is affected by the impedance setting. This allows for a sweepable frequency cutoff range from below 20 Hz to approximately 200 Hz, just by turning the "Z" knob. This can be especially useful for tonal shaping or reducing the proximity effect of a ribbon or dynamic microphone

The CL-Z has a two-position gain switch allowing for more gain, or the maximum gain available. Most of the time the MAX (approx. +25 dB) position will be used, however, the reduced gain setting (approx. +12 dB) may be useful in situations where the source does not require as much gain, or where more of the preamp's color from additional gain is desired.

Cloud Microphones Cloudlifter CLZ Microphone Activator with VariZ and VariHPF Features:

 
  • 1x Mic Input
  • Variable Impedance 150 Ohms to 15 kOhms
  • HPF Variable from 20 Hz to 200 Hz
  • +12 dB or +25 dB Gain Settings
  • Increases Gain Before Feedback Ratio
  • Use with Passive Dynamic & Ribbon Mics
  • Requires Only Phantom Power to Operate
  • Ideal for Long Cable Runs
  • Use with Low-Output Mics
  • Use with Noisy or Low-Gain Preamps

 

Specifications:

Brand Cloud
Manufacture SKU Cloudlifter CL-Z
UPC 793573085559