- Description
-
Details
The SE Electronics Dynamite Active in Line Preamp from SE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration.
High-performance Class A design
With its state-of-the-art Class A circuit and hand-selected high-grade FETs, the DM1 boasts the lowest self-noise in its class. What's more, thanks to its dedicated output buffer amplifier, the gain boost it delivers is always a consistent 28dB regardless of the connected load. The DM1's output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz, and hum.
Inside the SE Electronics Dynamite Active in Line Preamp:
[+]28DB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD
The DM1 provides +28dB of consistent gain regardless of the connected load, thanks to its dedicated buffer amplifier. Designed for neutral, balanced sound quality, the DM1 DYNAMITE is the perfect way to boost the signal of any dynamic or passive ribbon microphone.
SOPHISTICATED CLASS-A ELECTRONICS
With a sophisticated class-A transformerless design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market for pristine sound quality.
SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH
The DM1 is built to provide reliable, consistent operation for the most demanding on-stage applications in the most demanding environments. With a roadworthy, slim all-metal design and robust construction with high-quality manufacturing standards to handle drops, falls, and even kicks.
DEDICATED OUTPUT BUFFER AMPLIFIER
Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide a significantly improved level to your preamp – all without adding noise or coloration. In addition, its output impedance is the lowest in its class, allowing the DM1 to drive long cable runs while reducing susceptibility to RF interference, buzz, and hum.
LOSS-FREE & RELIABLE SIGNAL CONNECTION
Gold-plated XLR connectors ensure loss-free and reliable signal connection for your favorite dynamic and passive ribbon microphones.
sE Electronics DM1 Dynamite Features:
- Requires passive microphone (ribbon/dynamic) and 48V phantom power
- Not for use with phantom-powered microphones (condenser microphones, active ribbon mics)
- Provides 28dB of clean, consistent gain
- Designed for neutral, balanced sound quality
- The perfect way to boost the signal of a passive microphone
- Gain stays consistent regardless of the connected load
- Provides significantly improved level to your mic preamp for proper gain staging
- State-of-the-art Class A electronics and high-grade FETs provide supremely class-leading low noise
- Transformerless design for pristine sound quality
- Dedicated output buffer amplifier provides 28dB output, independent of load impedance or cable length
- Extremely low output impedance drives long cable runs and reduces susceptibility to RF interference, buzz, and hum
- Gold-plated XLR connector for loss-free and reliable signal connection
- Slim, roadworthy all-metal housing with premium finish provides efficient rejection of electrical interference and noise
- High-quality finish ensures a great look for many years
- Slim design allows for easy deployment onstage or in the studio
Specifications
General
Brand SE Electronics Manufacture SKU DM1-MIC-PRE-U UPC 819032011560 In-Line Accessory Type Pre-Amplifier Input / Output Level Input: Mic Level
Output: Mic LevelNumber of Channels 1 Gain +28 dB (1-Kilohm Load) Circuit Type Class-A FET Controls None Connectivity
I/O 1 x XLR 3-Pin Female Input
1 x XLR 3-Pin Male OutputPerformance
Frequency Response 10 Hz to 120 kHz -0.3 dB Impedance 135 Ohms Load Impedance 1 Kilohms (Minimum) Max Output Level +8.3 dBV (0.5% THD) Noise Output Noise:
30 dBm (JIS-A)Power
Operating Voltage 48 V (Phantom Power) Operating Current Consumption 3.0 mA Physical
Dimensions 0.75 x 3.76" / 1.91 x 9.55 cm Weight 2.8 oz / 79.9 g
800-664-1971 516-500-3605
1168 Wantagh Avenue
Wantagh, New York 11793
Wantagh, New York 11793
17th Street Photo
Customer Services
Family owned and operated since 1992
Manufacturer authorized dealers of every line.
No grey market.
Manufacturer authorized dealers of every line.
No grey market.
Copyright © 2016 17th Street Photo Website