Accessories

The Sigma USB Dock, Mount for Canon allows you to connect your Sigma Global Vision lenses to your computer in order to update firmware and adjust focus setting parameters using the Sigma Optimization Pro software.

The Sigma USB Dock, Mount for Sigma allows you to connect your Sigma Global Vision lenses to your computer in order to update firmware and adjust focus setting parameters using the Sigma Optimization Pro software.

Adjust and update select Sigma USB Dock, L Mount lenses, teleconverters, and mount converters with the UD-11 USB Dock. Used in conjunction with Sigma's Optimization Pro software, this useful accessory can be used to update lens firmware as well as adjust the amount of focus movement and MF timing when operating the focus ring.

The Profoto Speed Ring for OCF Flash Heads from Profoto is part of the Off-Camera Flash system developed for the B2 head but is also compatible with the B1 and B10s Off-Camera Flash. The speed ring has been scaled down and fitted with an easy patent-pending snap-in system for the softbox rods while the hard rubber collar has been replaced with a lighter-weight silicone rubber substitute. The speed ring and optional softbox are able to rotate 360 degrees.

Able to last for multiple times longer than conventional AA batteries, the Profoto A-Series Battery Mk II Li-Ion Battery for A1, A1X, and A10 will keep your flashes powered up. This can produce up to 450 full-power flashes on a single charge (depending on the A-series flash model). Additionally, it is UN-certified for air travel.

This 2' diameter Profoto OCF Octa Softbox 2' is part of the Off Camera Flash accessory system intended for the B1s and B10s OCF flash heads. Ideal for portraiture, the octagonal shape and large surface area of this softbox render a signature wrap-around quality of light, especially when used in close quarters. Light weight and speed are evident throughout its construction. The fixed front diffuser saves on setup time, as do the color-coded support rods that mount quickly to the separately-purchased, patent-pending speed ring. An optional fabric grid is available to narrow the softbox's beam and add directional control.

With the Profoto Connect Wireless Transmitter for Canon cameras, you have a wireless connection with AirTTL lights that controls flash sync, remote control, Auto TTL, and HSS. The transmitter also controls flash sync and remote control in Air lights. There are three settings on the Connect transmitter itself. Auto being the first takes all the guesswork of setting up your flashes. The manual setting is there if you want to set the flashes yourself and be more creative. The final setting, of course, is to turn it off when the transmitter is not in use.

By downloading the Profoto Camera or Profoto Control apps and with a Bluetooth connection, you can control your lights wirelessly as well and upgrade your firmware later through the app. The Connect works on a frequency of 2.4 GHz and up to eight channels with an operating range of 1000' when using it with normal sync flash and remote control, and 330' with Auto TTL and HSS. The built-in lithium-ion polymer battery has a battery life of 30 hours and is rechargeable via the included USB cable. Additionally, the transmitter powers off after 60 minutes of inactivity.

With the Profoto Connect Wireless Transmitter for Nikon cameras, you have a wireless connection with AirTTL lights that controls flash sync, remote control, Auto TTL, and HSS. The transmitter also controls flash sync and remote control in Air lights. There are three settings on the Connect transmitter itself. Auto being the first takes all the guesswork of setting up your flashes. The manual setting is there if you want to set the flashes yourself and be more creative. The final setting, of course, is to turn it off when the transmitter is not in use.

With the Profoto Connect Wireless Transmitter for Fujifilm cameras, you have a wireless connection with AirTTL lights that controls flash sync, remote control, Auto TTL, and HSS. The transmitter also controls flash sync and remote control in Air lights. There are three settings on the Connect transmitter itself. Auto being the first takes all the guesswork of setting up your flashes. The manual setting is there if you want to set the flashes yourself and be more creative. The final setting, of course, is to turn it off when the transmitter is not in use.

By downloading the Profoto Camera or Profoto Control apps and with a Bluetooth connection, you can control your lights wirelessly as well and upgrade your firmware later through the app. The Connect works on a frequency of 2.4 GHz and up to eight channels with an operating range of 1000' when using it with normal sync flash and remote control, and 330' with Auto TTL and HSS. The built-in lithium-ion polymer battery has a battery life of 30 hours and is rechargeable via the included USB cable. Additionally, the transmitter powers off after 60 minutes of inactivity.

With the Profoto Connect Wireless Transmitter for Olympus cameras, you have a wireless connection with AirTTL lights that controls flash sync, remote control, Auto TTL, and HSS. The transmitter also controls flash sync and remote control in Air lights. There are three settings on the Connect transmitter itself. Auto being the first takes all the guesswork of setting up your flashes. The manual setting is there if you want to set the flashes yourself and be more creative. The final setting, of course, is to turn it off when the transmitter is not in use.

By downloading the Profoto Camera or Profoto Control apps and with a Bluetooth connection, you can control your lights wirelessly as well and upgrade your firmware later through the app. The Connect works on a frequency of 2.4 GHz and up to eight channels with an operating range of 1000' when using it with normal sync flash and remote control, and 330' with Auto TTL and HSS. The built-in lithium-ion polymer battery has a battery life of 30 hours and is rechargeable via the included USB cable. Additionally, the transmitter powers off after 60 minutes of inactivity.

Designed for the Profoto B10, B10 Plus, and B1X lights, the Profoto OCF II Barndoors have the standard rubber mount that slips quickly over the light and locks down in a couple of seconds onto the fixture. The 4-way construction allows you to swing one or more leaves into the beam spread to enable selective lighting, while its magnetic mount accepts OCF II gels and grids.

There’s no simpler way to get perfect exposure. Connect your Profoto Air Remote TTL-C for Canon to your camera wirelessly by attaching the remote to your camera’s hot shoe. Then, point and shoot in TTL mode, and the Air Remote TTL communicates with the flash. You get perfect exposure. Automatically.

Using Profoto AirTTL, you can even leave your light meter at home and get your shot faster. For more precise control, first, shoot in TTL mode to get perfect exposure, then switch to Manual Mode while keeping the same settings, and finally, creatively fine-tune and tweak the light just as you want it.

There’s no simpler way to get perfect exposure. Connect your Profoto Air Remote TTL-N for Nikon to your camera wirelessly by attaching the remote to your camera’s hot shoe. Then, point and shoot in TTL mode, and the Air Remote TTL communicates with the flash. You get perfect exposure. Automatically.

Using Profoto AirTTL, you can even leave your light meter at home and get your shot faster. For more precise control, first, shoot in TTL mode to get perfect exposure, then switch to Manual Mode while keeping the same settings, and finally, creatively fine-tune and tweak the light just as you want it.

There’s no simpler way to get perfect exposure. Connect your Profoto Air Remote TTL-O for Olympus to your camera wirelessly by attaching the remote to your camera’s hot shoe. Then, point and shoot in TTL mode, and the Air Remote TTL communicates with the flash. You get perfect exposure. Automatically. Using Profoto AirTTL, you can even leave your light meter at home and get your shot faster. For more precise control, first, shoot in TTL mode to get perfect exposure, then switch to Manual Mode while keeping the same settings, and finally, creatively fine-tune and tweak the light just as you want it.

There’s no simpler way to get perfect exposure. Connect your Profoto Air Remote TTL-F for Fujifilm to your camera wirelessly by attaching the remote to your camera’s hot shoe. Then, point and shoot in TTL mode, and the Air Remote TTL communicates with the flash. You get perfect exposure. Automatically.

Using Profoto AirTTL, you can even leave your light meter at home and get your shot faster. For more precise control, first, shoot in TTL mode to get perfect exposure, then switch to Manual Mode while keeping the same settings, and finally, creatively fine-tune and tweak the light just as you want it.

With the OCF Adapter you will have full creative flexibility with your Profoto A1, A1X or A10. The new adapter makes it possible for you to attach any of our wide range of OCF Light Shaping Tools, making it easy for you to shape the light in any way you desire.

Simply attach the adapter to your A1, A1X, or A10 flash, add the modifier of your choice, and you are ready to start creating. Attach an OCF Softbox for soft light, bring out the beauty in your model by using the OCF Beauty Dish, or use the OCF Magnum Reflector to add maximum power.

Use this Profoto Clic OCF Adapter II from Profoto to instantly mount all Profoto A-series flashes with its magnetic ring. A shortened distance to the umbrella mount guarantees a centered umbrella which improves light quality and output. It works with with the full range of OCF light-shaping tools and can be combined with Clic light modifiers by simultaneously attaching them to the center metal ring.

Offering an intuitive and straightforward design, this Profoto Connect Pro Non-TTL Remote provides non-TTL group control for AirX flashes. Simply slide it into your camera's hot shoe, and you're ready to create great images. Compatible with any camera featuring a hot shoe, this remote allows instant manual control of each individual flash setting from your shooting position, so you can finesse and fine-tune at will. You can also choose where to receive the information as the Connect Pro settings are easily mirrored in the Profoto Control app on your iPad, iPhone, or Android smartphone.

Offering an intuitive and straightforward design, this Profoto Connect Pro Remote for Nikon provides non-TTL group control for AirX flashes. Simply slide it into your camera's hot shoe, and you're ready to create great images. Compatible with any camera featuring a hot shoe, this remote allows instant manual control of each individual flash setting from your shooting position, so you can finesse and fine-tune at will. You can also choose where to receive the information as the Connect Pro settings are easily mirrored in the Profoto Control app on your iPad, iPhone, or Android smartphone.